How much torque is enough? Step 1 - Seco Seal 37 degree conical seal placed on fitting, ready for assembly
Ready to apply torque: Step 2 - Wrenches hold each piece at the starting point
First torque application: Step 3 – Begin initial torque to spec
Re-torque: Step 4 - After initial torque, wait 15 seconds, then re-torque
Check the visible ring: Step 5 – Sealing ring confirms properly torqued connection
Confirmation of the correct seal: Step 6
Examples of various sizes of SECO7 37 degree Copper Flared Gaskets
Examples of various sizes of SECO7 37 degree Nickel Conical Seals
Example of fitting used with SECO7 37 degree flare washers
This closeup image shows a SECO7 37 degree copper Flared Gasket on a fitting prior to installation.
Tools and fittings needed to successfully install 37 degree SECO7 crush washers
Example of finished assembly after installation of SECO7 conical seal
SECO7 37 degree flare saver operating temperature range

QUALITY

copy-Secoheader

Bluefittings

Phone: (714) 546-3478 Fax: (714) 546-3106

E-mail: sales@secoseals.com

Out of Round Inspection

SECO7 conical seals are soft and malleable. An out of round shape is not a reason for rejection of the seal. These videos describe how to inspect and correct a SECO7 conical seal that has been bent during shipment, storage, etc.

SECO7 Out of Round Conical Seal Correction

SECO7 aus der runden konischen Dichtungskorrektur

SECO7 Correction circulaire hors cône

SECO7円形円錐形シール補正外 SECO 7 enkei ensuigata shīru hosei-gai

SECO7 fuori corsa di tenuta conica

SECO7圆锥形密封修正 SECO7 yuánzhuī xíng mìfēng xiūzhèng

SECO7 Correção do selo cônico fora da rodada

SECO7 Corrección del sello cónico redondeado

SECO7 من جولة المخروطية ختم الختم SECO7 min jawlat almakhrutiat khatam alkhtm

Quality Certification

SECO SEALS is ISO 9001:2015 and AS9100D Certified

Click here to download a PDF of Seco’s ISO 9001:2015 and AS9100D Certificate

ISO 9001:2015 and AS9100D Certificate (TECHNICALLY EQUIVALENT TO EN 9100:2009 AND JISQ 9100:2009)

Document A-8.4.3-E

Seco Seals, Inc. Document, A-8.4.3-E, details the Purchase Order Terms and Conditions that conform to ISO 9001:2008 and AS9100C standards.

Click here to download a PDF copy of the

Purchase Order Terms and Conditions, document, A-8.4.3-E

Call or Fax us For Information

Phone: 714.546.3478
Fax: 714.546.3106

or

You Can Contact us Via E-mail

A World Leader in Gasket Design Since 1969

Translate »