How much torque is enough? Step 1 - Seco Seal 37 degree conical seal placed on fitting, ready for assembly
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Ready to apply torque: Step 2 - Wrenches hold each piece at the starting point
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
First torque application: Step 3 – Begin initial torque to spec
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Re-torque: Step 4 - After initial torque, wait 15 seconds, then re-torque
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Check the visible ring: Step 5 – Sealing ring confirms properly torqued connection
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Confirmation of the correct seal: Step 6
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Examples of various sizes of SECO7 37 degree Copper Flared Gaskets
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Examples of various sizes of SECO7 37 degree Nickel Conical Seals
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Example of fitting used with SECO7 37 degree flare washers
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
This closeup image shows a SECO7 37 degree copper Flared Gasket on a fitting prior to installation.
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Tools and fittings needed to successfully install 37 degree SECO7 crush washers
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
Example of finished assembly after installation of SECO7 conical seal
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE
SECO7 37 degree flare saver operating temperature range
COVID19 INFORMATION - SECO SEALS IS DESIGNATED AS CRITICAL INFRASTRUCTURE FOR ITS ROLE IN SUPPORTING THE DEFENSE INDUSTRIAL BASE (DIB) MEMORANDUM OF MARCH 2, 2020 AND IS CONTINUING PRODUCTION AND MAINTAINING OUR STANDARD OPERATIONS SCHEDULE

Torque Values

DLA’s landandmaritime.apps.dla.mil database

Appendix A “CONICAL SEALS, CRUSH, 37 DEGREE FLARED TUBE FITTING INSTALLATION PROCEDURE of DLA’s A-A-59935 document contains the recommended torque settings for SECO7 conical seals.

“CONICAL SEAL, CRUSH, 37 DEGREE FLARED TUBE FITTING GENERAL REQUIREMENTS FOR“, has the recommended torquing instructions for SECO7 conical seals.

The online document, A-A-59935 CID is available as a download link from DLA’s landandmaritime.apps.dla.mil database.

Call or Fax us For Information

Phone: 714.546.3478
Fax: 714.546.3106

Click Here to Contact us Via E-mail at sales@secoseals.com

Translate »